. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 06-09-2009 #1
    Lee Roberts's Avatar
    Lives in Milton Keynes, United Kingdom.
    Lee Roberts
    Last Activity: 1 Day Ago Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,938. Received thanks 230 times, giving thanks to others 788 times. Made a monetary donation to the upkeep of the community. Referred 11 members to the community.
    Ahhh yes 2 windings ! Sorry !

    Ok but if the cables connecting to the driver are carrying 4.2a, is that devided by 4 wires if the motor is in a bipolar parallel operation ?

    Basicly Irving i just want to know what the correct rating of the wire should be that i use to connect the drivers to each motor/XLR. Can i not just use the same rated wire as whats on the motors or is it better to step down as you go?
    .Me
    Reply With Quote Reply With Quote
  2. 06-09-2009 #2
    irving2008's Avatar
    Lives in NW London, gateway to A1 & M1, United Kingdom.
    irving2008
    Last Activity: 17-03-2017 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,849. Received thanks 179 times, giving thanks to others 5 times. Referred 6 members to the community.
    Quote Originally Posted by Lee Roberts View Post
    Ahhh yes 2 windings ! Sorry !

    Ok but if the cables connecting to the driver are carrying 4.2a, is that devided by 4 wires if the motor is in a bipolar parallel operation ?

    Basicly Irving i just want to know what the correct rating of the wire should be that i use to connect the drivers to each motor/XLR. Can i not just use the same rated wire as whats on the motors or is it better to step down as you go?
    Lee, the attached diagram might help.
    Attached Thumbnails Attached Thumbnails Click image for larger version.  Name: bipolar-wiring.gif  Views: 1220  Size: 13.1 KB  ID: 837  
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Stepper Motor Driver - cheap similar to ArcEuro 4.2A Bi-Polar Stepper Motor Driver
    By craynerd in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 16-03-2014, 07:29 PM
  2. BOBCAD V24, Selecting issue on boundry & geomatry
    By craigrobbo in forum BobCAD-CAM
    Replies: 1
    Last Post: 14-05-2012, 02:56 PM
  3. Which stepper driver
    By Colin Barron in forum Motor Drivers & Controllers
    Replies: 0
    Last Post: 25-09-2010, 08:33 PM
  4. DIY Driver Cards
    By malik sohail in forum Electronic Project Building
    Replies: 3
    Last Post: 27-12-2009, 10:41 PM
  5. Driver box
    By John S in forum General Electronics
    Replies: 1
    Last Post: 21-06-2009, 12:46 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules