6082 T6 Aluminium plate

[spluppit]

Sorry for the delay guys...

First off, 6082 x 3mm disks 237 Diameter 10 off approx £2.50 each. The odd one or two of these has picked up some minor corrosion, but it is minor as shown in the pic.

6082 Plate 330mm x 68mm x 6 mm as above just smaller £1.50 each approx 10 available

1" x 1" (25.4) Ally square bar 6082. 240mm long approx (varies) I will bundle up about 5 pieces and some smaller offcuts for £7.00 This will be random mix but i will ensure you get several longer pieces in the bundle. 5 bundles approx Please see my new thread for longer pieces.

Delrin blocks. Please note for those that don't know: Delrin and Acetal are the same thing, they are just different manufacturers using different trade names. The only difference I'm aware of is is Delrin has slightly better insulating properties. For all intents and purposes they are the same thing and machine the same.

Block sizes 31.5 x 30 x 31.5 Approx. 4 square faces and 2 sawn, please note the drill dimple in one end as shown in the image. 15 blocks for £5.00 Approx 100 + available


Ally plate 5083. 175mm wide x 6mm various lengths up to 1450 mm long and many shorter. Machines fine but not as good as 6082. (5083 is the same grade as tooling plate a lot of you are familiar with) this is just rolled and not cast. Please let me know of any interest in this i have yet to work any prices.

As mentioned before all plus courier cost.

[Woodfish]

Thanks for all your help Scott
Paul

[spluppit]

Hi Paul,

Many thanks for taking the time to visit. It really was a genuine pleasure to meet you.

Scott

[Will_D]

[QUOTE=spluppit;98567]
Please see my new thread for longer pieces.

Where is this?

[spluppit]

Sorry, the two threads have been split up in the list since posting.

http://www.mycncuk.com/threads/11585...-lots-of-it%29