Sadly not harsh, repeated explanations ignored culminating in-

Quote Originally Posted by dfox1787 View Post
thats correct. i would it expect it to know i already removed .45mm from the facing operation. I have to add a offset of -.45 for the tool path to start at the correct depth but it still pockets -2.45 which is going to make the the pocket deeper than it should be. At the moment the only way i can see is to leave it cutting nothing but it adds machining time. . To me it should know have took that into consideration.

Unless there is a setting im missing.

but if the fusion doesn't calculate it that it just adds more time for me creating paths. thank you for your response as always :)
Fusion 360 should know he's taken .45 off the stock (the top of which he's set as zero) and compensate for him but unfortunately Fusion 360 has the same problem as me, it's Crystal Ball is in for repair! :D