Thread: First Proper CNC Router
-
16-07-2020 #141
-
17-07-2020 #142
Machinery enamle sounds like the right paint! Going with a tin and brush this time. Never have much luck with spray paints.
Cover on the Z axis will go over the whole thing, like this one on one of JazzCnc machines.
http://www.mycncuk.com/threads/8701-...m-made-machine
Looks like aluminium from the picture.
-
18-10-2020 #143
Moving onto final assembly at last. Total gave up with paint in the end. After 4 tests with the second tin of enamel paint that all went soft even after drying for over a month, im going for the bear metal look! Its bone dry in the garage so dont see it been a problem.
Y (forward - backwards) axis rails have been leveled and are parallel, and both ball screws are have been aligned with the axis.
Struggling with aligning the pulleys that connect both ball screws to my single stepper. Any tips for getting them aligned would be appreciated.
Thanks
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NEW MEMBER: Production grade CNC router Vs Homebuilt CNC router advice
By SweetAs in forum New Member IntroductionsReplies: 27Last Post: 16-02-2019, 12:06 PM -
Denford router - Brushed router too brushless spindle - Help and advice please
By Tom B in forum Brushless Spindles & MotorsReplies: 4Last Post: 16-05-2016, 09:13 AM -
what router can i use with openbuild ox gantry router?
By davejavu123 in forum OpenBuilds OX CNC MachineReplies: 5Last Post: 13-08-2015, 01:40 PM -
eBay: CNC Router - EXELCNC HD1013 - Heavy Duty CNC Router
By Deuce_Coupe in forum Items On eBay UKReplies: 0Last Post: 16-07-2014, 11:46 AM -
Woo, my first 'proper' part!
By craigrobbo in forum Woodworking Project ShowcaseReplies: 29Last Post: 05-08-2012, 02:51 PM
Bookmarks