HI diycnc

I can say epoxy is a bit of a mess, result is excelent.



But i do feel when you do 2 pours like 1 to get in to plane where thinnest film is 3mm thick or so and then do a final pour of another 3 or 4 will give you excellent results.

Please read up on best practices on this forum.

I had about 3 mm of warp over 1850mm
i did a single pour 4 to 7 mm

I did ignore the reports about epoxy shrink differences where layer thickness is different, which is solved by a second pour.
Maybe I will do a second pour some day...

I have no jobs that need such accuracy yet.

Grtz Bert




Verstuurd vanaf mijn SM-A505FN met Tapatalk