tb6560 controller problem

[Doddy]

Just a thought - have a look at the step/direction pulse width within Mach3 (if this is what you're using). Fiddle the value to be longer (e.g. 5us) and see if this helps any.

[Wayne B]

Thanks for the reply's. In true fashion, I finally gave in and asked then went back to it and tried more things. I changed the step setting to 1/8 from 1/16 and slowed it down considerably (although the old speed setting worked with the original controller) and got it working. I will try changing the pulse widths too as I'm still not 100% with it right now, although it is getting things cut for now.
More settings testing to follow....