Thread: denford triac rigid tapping
-
11-08-2018 #21
Ok. I think this is max speed for a rigid tap at 6mm diameter
1200 rpm
https://youtu.be/mhANVN6tvCI
-
14-08-2018 #22
Added one of my probes tonight :-)
Triac is coming on nicely now :-)
Even made the tapped probe plate on it ( small steps but huge to me)
https://youtu.be/gcapYA04i14
-
22-08-2019 #23
-
22-08-2019 #24
most of us have put newer easier to manipulate controls in. hacking fanuc stuff is hard work!
mine is running uccnc on uc300eth motion controller.
if you can find an 80 frame size servo for spindle it will bolt straight on with a adapter plate.
-
22-08-2019 #25
Okay thanks. Did you keep the other motors? I have fanuc servomotors they work pretty well is it possible to keep them or is it better to throw all out and put a new controllboard and servomotors and drives inside?
Thanks a lot for your support.
-
22-08-2019 #26
I retrofitted mine with a Dynomotion KFlop.
Details of the new spindle motor are buried somewhere in this thread - http://www.mycncuk.com/threads/10344...ofit-thread%29Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
-
22-08-2019 #27
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
FOR SALE: Denford Triac PC inc Denford table plus chucks, and Denford CD software etc
By Piero franchi in forum Items For SaleReplies: 8Last Post: 14-02-2017, 04:47 PM -
FOR SALE: Denford Triac + Denford Orac + other stuff
By Clive S in forum Items For SaleReplies: 6Last Post: 06-02-2017, 11:47 PM -
Denford Triac - Help
By mikeadams1985 in forum Denford MillsReplies: 1Last Post: 12-01-2017, 10:06 AM -
FOR SALE: Denford Triac
By asto in forum Items For SaleReplies: 19Last Post: 07-02-2016, 08:28 PM -
WANTED: Denford Triac
By edwardsjc in forum Items WantedReplies: 13Last Post: 20-08-2012, 08:17 AM
Bookmarks