denford triac rigid tapping

**battwell** · 25-01-2018

as uccnc fully supports rigid tapping- and others are using it daily id like to add it to the triac.
if i run into problems- il go with tapping head .
to be fair with the amount of real paying work i have its going to be a while before the new "hobby machine" gets done.

**andy_con** · 26-01-2018

Is it really worth the cost and effort, use threadmills

**battwell** · 21-05-2018

Does anyone have a spare encoder cable or just encoder plug for fanuc red cap
Only required for test rig to set up my new drives.
Terminal layout is different to most motors- pain!

Click image for larger version.

Name: IMG_4246.jpg
Views: 531
Size: 269.5 KB
ID: 24244

**battwell** · 29-05-2018

Got the red caps running perfectly on step/ direction
:-)

**battwell** · 20-07-2018

It will rigid tap :-)
https://youtu.be/eD8rGgB8xN4

**Chaz** · 20-07-2018

Originally Posted by battwell

It will rigid tap :-)
https://youtu.be/eD8rGgB8xN4

Nice, saw the post on FB.

**battwell** · 29-07-2018

Can anyone that’s using bt35 tooling please measure a pull stud for me
Especially distance from top to clamping face.
Seems I have some that pull tight and some tools have slight play!