Cnc wiring!

[Cobey3289]

Hi jazz,
Seems like a total re-think is in order.
Just off the bat then, having already purchased the nemas and drivers (already en route)! What would you recommend for the rest of the kit to complete my 750x1000mm . I have c beams already, may need to add to this to adapt to ball screws etc.
Thanks
Mick

[JAZZCNC]

Hi jazz,
Seems like a total re-think is in order.
Just off the bat then, having already purchased the nemas and drivers (already en route)! What would you recommend for the rest of the kit to complete my 750x1000mm . I have c beams already, may need to add to this to adapt to ball screws etc.
Thanks
Mick

Mick Neil says it all really but straight off the bat I can tell your design is probably working along the wrong lines for good machine because you mention C beams. This type of beam isn't often used because of it's weak flexy nature.

This is why we ask new builders to start a thread and give some idea of the design. Even if it's just picture of fag packet sketch.
Like any structure you start at the foundations and if these are flawed then the whole structure fails. The Machine design then leads you to what components are required.

Building a good CNC machine is done in orderly stages and nearly all those that shoot off buying components before the design is finalized waste money.

Start a Build thread mate.