Thread: Hi From Hereford
Hybrid View
-
26-01-2018 #1
Don't own a cnc at the moment and I'm looking around to see what will suit me best.
I build acoustic and classical guitars and I'm looking for a smallish m/c to cut inlays into the headstock and shape bridges etc. All small sized pieces working mainly in a variety of timbers but using metals (ali / brass etc) for some of the inlays.
My initial thoughts have been towards the 3040 and 3020 cnc m/c from China but I'm not sure if that's the right path to tread?
I design my inlays in Photoshop CS3 Extended and will use something like Inkscape to produce the vector graphics - after that I'm lost....
So very much a newbie to cnc but I do work with hand tools, routers, saws etc (just find the very small stuff getting more awkward!)
Thanks
-
Hi and welcome to the forum, there is a guy on here call Wal that does similar stuff to what you are wanting to do.
here is a link to his blog https://wrbl.tumblr.com/..Clive
The more you know, The better you know, How little you know
-
26-01-2018 #3
-
27-01-2018 #4
Hi Francis,
(Thanks for the shout out Clive)
Yep, I've done a bit of inlay work and have a reasonably good idea of the workflow. It's not particularly complicated as the software makes it so easy - drop me a line with any questions, would be happy to give you some pointers!
Wal.
-
27-01-2018 #5
Thanks Wal,
I've been doing a little research into a self build cnc and found this site/machine: https://solsylva.com/cnc/18x24x5.shtml There are a couple of smaller designs that would suit with 13 x 13 (inches) and 10 x 9 inch beds. The 18 x 24 inch bed though would allow me to cut full scale guitar fronts/backs which are only about 5mm thick in the rough. Maybe even hog out the front/back plates for an archtop! Not sure just what level of accuracy these would give but I suspect for inlay and body shaping tasks they would be quite suitable - welcome your thoughts on that?
I can/would fit either a trim router (Makita/DeWalt etc) or a Dremel/Axminster mini router. But happy to go with a more purpose made spindle...
Still looking but the self build rather than buying a Chinese m/c is definitely more appealing. If you know of other similar self build sites a link would be great.
Many thanks for prompt response to my query.
Francis
-
27-01-2018 #6
I've purchased the plans for the 5 cnc machines at the above link really to get a better idea about how things go together and try and assess the choices made in the different designs (fixed or moving gantry's). The 18 x 24 moving gantry machine ( https://solsylva.com/cnc/18x24x5.shtml ) uses a rack-n-pinion for the long axis. I'm not sure if that has been done on a cost/availability basis or for a given accuracy - would welcome others thoughts on that. If a rack-n-pinion is a favourable option are there good/better R&P's ?
Last edited by fwm891; 27-01-2018 at 09:59 PM.
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
NEW MEMBER: New Member from Hereford
By philipround in forum New Member IntroductionsReplies: 1Last Post: 13-12-2010, 12:27 AM -
NEW MEMBER: Hi From Hereford
By skench in forum New Member IntroductionsReplies: 1Last Post: 02-11-2010, 03:22 PM
Bookmarks