Cslabs now have Own Control Software

[JAZZCNC]

Dean,
A good report on the software would be great particularly looking at dual homing/gantry correction and info on the tool change procedure would be well received. I am seriously looking and dumping the cslabs control and moving to Centroids Acorn. I remember emailing Cslabs a while back asking if they would support any other software apart from Mach and they said they didn't have any plans for it so maybe this was just under wraps until it reached release stage. Unfortunately I don't have a working machine to test it on at the moment but does it operate in demo mode?

Ian

Hi Ian,

Wouldn't jump ship to Acorn just yet if your using on Router. I've got one here and it's not well featured for Routers at minute. However it's being worked on as we speak. Centroid guys are very helpful and as we are asking them for features they are providing them or trying.
Just last night was working on new tool change macro provided which is more suited to routers. But there PLC works very different to anything I've used before so lots of head scratching at minute.

To be honest, until they make the homing work correctly to suit slaved motors it's none starter for me. But they are working on it and hopefully will soon have something to test.

Regards SimCNC then I will report back but as of yet, I've not got it working with the IP-S on my machine because it won't update the firmware. (But my IP-S is very early version so could something to do with that.?)
I have just installed it on new IP-M (just on bench test) and worked no problems. However, I now need License key so waiting for them to send me that.

The software will install without needing controller attached (does need internet access to install) but won't let you do anything without controller attached and even when you do have one attached won't do anything without license Key.

When I have it up and Running then Yes I will make video. However I wouldn't start getting excited just yet because it's still work in progress and I'm sure got a long way to go before can match other well established software.