Thread: FeatureCam - first attempt
-
01-09-2009 #1
I have been playing with FeatureCam 2009 for the last couple of days and I have eventually got my head round it, took a few hours but well worth it. I have attached my results below.
I have also attached a Featurecam post processor that I have been tweaking which will allow it to produce programs suitable for Mach3, be aware that it is not finished or fully tested but is producing good results as you can see.
If anyone does have a fully working and tested post processor then please let me know as I have looked everywhere and can't find one.Last edited by HiltonSteve; 01-09-2009 at 09:04 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Plasma Attempt #2
By Robin Hewitt in forum DIY Plasma Build LogsReplies: 21Last Post: 02-09-2012, 08:05 PM -
ok, first attempt using sketchup 8
By deannos in forum Gantry/Router Machines & BuildingReplies: 89Last Post: 25-08-2012, 03:00 PM -
BUILD LOG: My first attempt.... 8 x 4
By trounce in forum DIY Router Build LogsReplies: 0Last Post: 18-10-2011, 11:31 AM -
BUILD LOG: My First Attempt Of A CNC
By AdCNC in forum DIY Router Build LogsReplies: 61Last Post: 21-10-2010, 03:55 PM -
help please with first attempt
By phill05 in forum Machine DiscussionReplies: 13Last Post: 01-06-2010, 05:42 PM
Bookmarks