. .

Thread: DMM Servos

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 12-02-2018 #2
    m_c's Avatar
    Lives in East Lothian, United Kingdom.
    m_c
    Last Activity: 2 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 2,964. Received thanks 368 times, giving thanks to others 8 times.
    I've priced a set from them in the past, and from what I could make out, they're chinese made with a proper English manual.

    Having checked the quote I got, the reason I never bought them, was at the time they were using pretty rubbish spec. I got a quote for 750W, and they had a max speed of 1080RPM.
    Plus by the time all the required extra cables were added on, along with carriage, they weren't so cheap.

    Most servo drives now will let you run step/dir. It's just that you're then reliant on the drives tolerances for position.
    All the Kinco drives I've got can be set to run step/dir, it's just I've always used +/-10V.

    Quick edit. I should add that they're current offerings are not as limited as they were. They're DYN2 drives when paired with 750W motor is still a bit limited (2000RPM), but everything else seems to be on par with other manufacturers.
    Last edited by m_c; 12-02-2018 at 12:32 PM.
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Best Drive for Fanuc AC servos
    By Ross77 in forum Motor Drivers & Controllers
    Replies: 16
    Last Post: 31-05-2018, 10:17 AM
  2. Advice on buying servos.
    By Agathon in forum Stepper & Servo Motors
    Replies: 72
    Last Post: 28-08-2017, 08:37 AM
  3. digital to analog servos
    By elad1987 in forum Control Hardware & Systems
    Replies: 3
    Last Post: 15-06-2017, 09:59 PM
  4. CS-LAB AC-servos + SIMdrive
    By blim in forum Stepper & Servo Motors
    Replies: 0
    Last Post: 20-02-2017, 12:52 PM
  5. Mitsubushi Servos
    By Chaz in forum General Electronics
    Replies: 0
    Last Post: 24-04-2016, 08:08 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules