. .

Thread: DMM Servos

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 13-02-2018 #1
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by Ger21 View Post
    The reason I went with the DMM is because they have good support, and are about $100/set cheaper than the cheap chinese models on Ebay and AliExpress.
    Think you got that wrong way round Gerry.? DYN4 Drive & 750W Motor on DMM online shop shows $457 and not sure if that includes Servo cables.
    Where Lichuan 750W motor and Drive with 3Mtr cable set is $312
    Last edited by JAZZCNC; 13-02-2018 at 12:55 AM.
    Reply With Quote Reply With Quote
  2. 13-02-2018 #2
    Ger21's Avatar
    Lives in Detroit, United States.
    Ger21
    Last Activity: 24-07-2022 Has been a member for 9-10 years. Has a total post count of 651. Received thanks 90 times, giving thanks to others 0 times. Referred 1 members to the community.
    Shipping always pushed the chinese price up higher.
    But I just looked, and see the Lichuan 400w for $350, including 10m cables. That is a good price.
    I need to buy 2 more, so I may look at those.
    Gerry
    ______________________________________________
    UCCNC 2022 Screenset

    Mach3 2010 Screenset

    JointCAM - CAM for Woodworking Joints
    Reply With Quote Reply With Quote
  3. 13-02-2018 #3
    m_c's Avatar
    Lives in East Lothian, United Kingdom.
    m_c
    Last Activity: 10 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 2,971. Received thanks 369 times, giving thanks to others 9 times.
    The quote I got from DMM came to about $2200, but that was in 2012.
    That was for three 750W servos with DYN3 drives, all the required cables, and carriage to the UK.

    What I will say though, is if you're upgrading a stepper system, the fact DMM do NEMA23/34 size motors, would make me consider those sizes to avoid having to rework brackets.
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Best Drive for Fanuc AC servos
    By Ross77 in forum Motor Drivers & Controllers
    Replies: 16
    Last Post: 31-05-2018, 10:17 AM
  2. Advice on buying servos.
    By Agathon in forum Stepper & Servo Motors
    Replies: 72
    Last Post: 28-08-2017, 08:37 AM
  3. digital to analog servos
    By elad1987 in forum Control Hardware & Systems
    Replies: 3
    Last Post: 15-06-2017, 09:59 PM
  4. CS-LAB AC-servos + SIMdrive
    By blim in forum Stepper & Servo Motors
    Replies: 0
    Last Post: 20-02-2017, 12:52 PM
  5. Mitsubushi Servos
    By Chaz in forum General Electronics
    Replies: 0
    Last Post: 24-04-2016, 08:08 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules