. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 12-02-2018 #5
    Chaz's Avatar
    Lives in Ickenham, West London, United Kingdom.
    Chaz
    Last Activity: 26-08-2025 Has a total post count of 1,654. Received thanks 115 times, giving thanks to others 71 times.
    Those are guidance and machine specific.

    Try uncoated 2 flute endmills for alu (both for roughing and finishing). Roughing 3 flute endmills (corn cobs) work well and like to be driven hard (much harder than you expect) but you must keep chips (or swarf) away from the flutes.
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to Chaz For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Help with speeds/feeds please?
    By examorph in forum Tool & Tooling Technology
    Replies: 5
    Last Post: 29-01-2017, 01:54 PM
  2. Speeds and feeds
    By eurikain in forum Workshop & Equipment
    Replies: 3
    Last Post: 26-03-2016, 06:00 PM
  3. Feeds and speeds software
    By suesi34e in forum Swarf & Chip Management
    Replies: 4
    Last Post: 22-03-2016, 10:30 PM
  4. Feeds and speeds
    By dudz in forum Tool & Tooling Technology
    Replies: 0
    Last Post: 26-08-2013, 11:42 AM
  5. Speeds and Feeds
    By Web Goblin in forum Tool & Tooling Technology
    Replies: 0
    Last Post: 20-09-2012, 01:38 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules