. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 14-02-2018 #14
    Dean jeffery's Avatar
    Lives in Rotherham, United Kingdom.
    Dean jeffery
    Last Activity: 27-12-2024 Has been a member for 9-10 years. Has a total post count of 126. Received thanks 5 times, giving thanks to others 11 times.
    The reason why the tool leaves the material is because I set a lead in, I've also set a smooth ramp 3mm

    I remove lead in and just left ramp now this keeps the tool into the material as you say.

    I've just tested and takes the profile time down from 3:45 to 3:28 but I increased ramp to 5mm.

    Then slowed the feed from originally 2500 down to 1500, slowed it down based off johns link and cutters above slows the profile time down to 4:35 with that small amount of increase it ain't really an issue.
    Last edited by Dean jeffery; 14-02-2018 at 06:10 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 3 users browsing this thread. (0 members and 3 guests)

Similar Threads

  1. Help with speeds/feeds please?
    By examorph in forum Tool & Tooling Technology
    Replies: 5
    Last Post: 29-01-2017, 01:54 PM
  2. Speeds and feeds
    By eurikain in forum Workshop & Equipment
    Replies: 3
    Last Post: 26-03-2016, 06:00 PM
  3. Feeds and speeds software
    By suesi34e in forum Swarf & Chip Management
    Replies: 4
    Last Post: 22-03-2016, 10:30 PM
  4. Feeds and speeds
    By dudz in forum Tool & Tooling Technology
    Replies: 0
    Last Post: 26-08-2013, 11:42 AM
  5. Speeds and Feeds
    By Web Goblin in forum Tool & Tooling Technology
    Replies: 0
    Last Post: 20-09-2012, 01:38 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules