Thread: Syil X4+ LCD panel
-
14-02-2018 #1
Not many posts here but here goes!
I'm after the LCD panel for an X4 +
I have taken the front panel off and the LCD panel has part number: YXD-19264H15B
I don't see mto be getting anywhere with Syil direct, so thought I would try here.
Any thoughts?
Matt
-
14-02-2018 #2
A quick search for that part number gives us this page with the key details - http://a1lcdtechnology.com/category/...me-lcd-module/
Datasheet with a bit more specifics can be found at http://www.yexinda.com/pdf02/YXD-19264H15B%20LCM.pdf
And a quick google for 192x64 lcd display, with a KS0108 compatible controller throws up this - https://www.buydisplay.com/default/3...ay-black-on-yg
Unfortunately China is on holiday, so you're probably not going to get any response until next month...Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
-
14-02-2018 #3
Thanks M_C
I had already seen the first 2 and have yet to receive a response from a1cdtechnology.
The fact that China is on holiday maybe a factor (stated on the 'buydisplay' site as from 8/2/18 to 25/2/18)
The 'buydisplay' link looks similar (only need to solder the pins for the cable) so this is probably worth a punt for for that price!
Thanks again, Matt
-
24-02-2018 #4
I have ordered one from BuyDisplay and will feedback once I have it!
-
12-03-2018 #5
I ordered one of these:
https://www.buydisplay.com/default/3...ay-black-on-yg
I needed to solder an edge pin connector to it (which was quite an easy job) and it works a treat.
Matt
-
The Following User Says Thank You to Clockworld For This Useful Post:
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
SYIL Power Drawbar
By petemilligan in forum Syil CNC MachinesReplies: 12Last Post: 05-07-2020, 07:59 AM -
Syil X4 Plus - E-stop issue
By Keith-h in forum Milling Machines, Builds & ConversionsReplies: 8Last Post: 03-12-2016, 05:53 PM -
syil x4
By geoff in forum Machine DiscussionReplies: 8Last Post: 30-11-2016, 07:35 PM -
Syil x4 or x5 as CAD/CAM training 4 axis CNC machine ???
By towdi.arek in forum Marketplace DiscussionReplies: 3Last Post: 20-07-2013, 07:26 AM -
FOR SALE: Syil SX3 CNC Mill + Tools & Accessories
By chas-SX3 in forum Items For SaleReplies: 1Last Post: 17-12-2011, 07:29 PM
Bookmarks