. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 19-02-2018 #1
    Neale's Avatar
    Lives in Plymouth, United Kingdom.
    Neale
    Last Activity: 1 Day Ago Has been a member for 9-10 years. Has a total post count of 1,740. Received thanks 297 times, giving thanks to others 11 times.
    The reason for the problem is that the 2nd set of coordinates is given with a G0, and the next two sets do not have any "G" command. Giving a set of coordinates without a "G" command means "repeat the last G0/G1/G83/whatever using these coordinates". So you move to the second location using G0, do nothing there, and then, in effect, do two more G0 commands. Nick is quite right - drop the G0 in line 3 but leave the coordinates as given, and you will then execute the three further peck drill cycles. Don't need to bother with ending the cycle.
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to Neale For This Useful Post:

    magicniner
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. G Code For Drilling Circle
    By dakes55 in forum Programmers Corner
    Replies: 0
    Last Post: 07-10-2016, 08:02 PM
  2. Drilling Ø0.2mm holes on aluminium
    By hoezap in forum Metalwork Discussion
    Replies: 5
    Last Post: 09-04-2016, 06:28 PM
  3. RFQ: CNC drilling/tapping
    By Wal in forum Projects, Jobs & Requests
    Replies: 2
    Last Post: 17-11-2013, 07:13 PM
  4. drilling brass?
    By irving2008 in forum Metalwork Discussion
    Replies: 23
    Last Post: 04-08-2012, 03:56 PM
  5. Drilling Acrylic with CamBam
    By m.marino in forum Machine Discussion
    Replies: 2
    Last Post: 06-06-2012, 04:45 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules