Newbie (ageing rapidly!)

[Desertboy]

I'd try and make one of your USB solutions work.

The Nvum controller seems a good place to start.

Join this forum then read this thread back to back, you are not alone.
https://en.industryarena.com/forum/h...-315210-5.html

This guy has an updated beta driver
http://www.opalsfromaustralia.com.au/cnc/

He has same controller as you, should be able to help you get going and is a forum member on industryarena.

I had a lot of the same issues. Went to win 7 32bit and a lot of them stopped. Still have a few issues but the router now runs for hours no problem.

Before I went back to 32bit operating system I tested on another 64 bit system and had the same issues. I was about to buy a different controller but decided to format and try again. Turned out to be something in the 64 bit operating system. Took me months of frustrating fault finding after work.

The nvem now happly runs my Alpha 1300x2500 router and has paid for it's self several times over.