. .
  1. #1
    Whilst stripping my machine for cleaning, I took the gas strut off and noticed it was more like a slide whistle with zero resistance!!

    Anyone replaced one on their machine? THe label on my strust is badly worn and torn. Not sure if it would help is I had any figures from it.

    I could try a generic one BUT I really don't know what force is required. Anyone got any suggestions?

    Last edited by Clockworld; 24-02-2018 at 11:20 AM.

  2. #2
    Should anyone wish to buy a gas strut (there are many suppliers) you need one that is rated at 400N. This seems to be the correct rating as when fitted all works well.
    I was advised to install the gas strut/spring upside down - ie the rod at the bottom - as this enables oil in the unit to help the seals.


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. SYIL Power Drawbar
    By petemilligan in forum Syil CNC Machines
    Replies: 12
    Last Post: 05-07-2020, 07:59 AM
  2. Syil X4+ LCD panel
    By Clockworld in forum Syil CNC Machines
    Replies: 4
    Last Post: 12-03-2018, 09:46 AM
  3. Syil X4 Plus - E-stop issue
    By Keith-h in forum Milling Machines, Builds & Conversions
    Replies: 8
    Last Post: 03-12-2016, 05:53 PM
  4. syil x4
    By geoff in forum Machine Discussion
    Replies: 8
    Last Post: 30-11-2016, 07:35 PM
  5. Gas Strut placement
    By Noplace in forum Linear & Rotary Motion
    Replies: 2
    Last Post: 17-11-2015, 09:25 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts