Thread: 1220 × 2440 build
Threaded View
-
26-02-2018 #6
Last Activity: 9 Hours Ago
With this budget you would be lucky to build a machine half the size you are after. I would suggest that you put some of your design idears up for other to critique. Also I would advise not to buy any parts or kits of parts until you have until you hav a good idear of what you require. Sorry for the doom and gloom but many have made the mistake of jumping in with both feet.If you had 2-3k (2) to spend and you needed a machine this size, how would you go about designing and building it? Materials and hardware etc. Can it be done?..Clive
The more you know, The better you know, How little you know
-
The Following 2 Users Say Thank You to Clive S For This Useful Post:
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 49 users browsing this thread. (0 members and 49 guests)
Similar Threads
-
BUILD LOG: New Build - For Your Amusement - MK-2 build
By Karl in forum DIY Router Build LogsReplies: 12Last Post: 08-02-2017, 08:03 PM -
BUILD LOG: New Build Log ... 2440 X 1220 X 300
By Wobblybootie in forum DIY Router Build LogsReplies: 30Last Post: 17-10-2014, 11:20 AM -
WANTED: 3 bits of 250 by 1220 by 40mm t-slot, 1220 16X5 threaded rod and isel ballscrew, plus
By nobby in forum Items WantedReplies: 1Last Post: 01-03-2014, 01:31 AM -
BUILD LOG: Steel Router 610 x 1220 x 200
By Stickio in forum DIY Router Build LogsReplies: 12Last Post: 18-08-2011, 07:27 PM
Bookmarks