Cutting gears - CNC vs laser

[m_c]

Let's get this straight: all you need to know in order to see if you're interested in the job or not is in my first post. Just ask yourself few simple questions:

Am I happy milling 10mm delrin with a 1.5mm bit?
Am I happy milling 14 x 50-150mm shapes out of delrin?

If the answer is yes, you get the dxf file and that's that. You don't need to know gear profile, you don't need to know bore. What's with all this hand-holding?

Yes.
Yes.
I can see a dummy lying on the ground, but no hand-holding.