. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 02-03-2018 #4
    Clive S's Avatar
    Lives in Marple Stockport, United Kingdom.
    Clive S
    Last Activity: 2 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 3,342. Received thanks 618 times, giving thanks to others 82 times. Made a monetary donation to the upkeep of the community. Is a beta tester for Machinists Network features.
    Hi Welcome to the forum barrica. If you need help you have to help yourself by giving good info so that people have a chance to help you.

    I have recently purchased a new CNC router "kit" and am at the stage of getting the stepper motors to run.

    I have them setup in MACH3, but when I try and jog the axis around using the keyboard the motors move but pretty slowly.
    A link to the kit would help also what voltage are you using on the drivers.

    I've tried tweaking all sorts of settings in the motor tuning config, but cant seem to get the axis to pyhsically move past around 1m/min -
    That is no help at all without what you actually have tweaked with numbers etc. Crystal ball has broke.
    Last edited by Clive S; 03-03-2018 at 12:12 AM.
    ..Clive
    The more you know, The better you know, How little you know
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Running CNC Router at 25mtr/minute
    By kmeshal9 in forum Gantry/Router Machines & Building
    Replies: 11
    Last Post: 02-08-2017, 10:20 AM
  2. Running a three phase router/mill on a generator?
    By gavztheouch in forum General Electronics
    Replies: 3
    Last Post: 19-02-2013, 12:39 PM
  3. axis not moving when running code
    By geny in forum Computer Software
    Replies: 0
    Last Post: 21-10-2012, 08:02 PM
  4. Running 4 axis from a ps806 or sps705 psu
    By jonbabbz in forum General Electronics
    Replies: 21
    Last Post: 14-07-2012, 09:50 AM
  5. 4th Axis running as CNC lathe using milling machine
    By Jonathan in forum Milling Machines, Builds & Conversions
    Replies: 6
    Last Post: 21-08-2011, 10:34 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules