Threaded View
-
19-03-2018 #1
Hi all,
My name is Graham and I'm in Boston Lincolnshire, I have been looking at building a cnc for quite a while now.
I have no experience at all at the electronics side of things- done cabinet making for 30 years.
With that in mind I decided to go for a set of plans by a chap called Joe in the USA.(Joescnc)
The machine itself is called a hybrid and I will be adding the upgrade of rack and pinion instead of ball screws.
The machine will be capable of cutting 8ft x 4ft boards although the original plans make a 4x4.
With Joe's plans- you purchase them and this gives you access to his builders forum where there are cutting files and various mods that people have included over time, also a few hundred build logs of all of these mods and plans put into practice.
I'm hoping after all these people have built and upgraded the machines that it might have most of the problems sorted out and so be fairly straightforward! lol
build log here
http://www.mycncuk.com/threads/11777...938#post100938Last edited by GrahamWhite; 19-03-2018 at 02:58 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
hybrid steppers
By Robsuffolk in forum Stepper & Servo MotorsReplies: 10Last Post: 02-02-2018, 02:23 PM -
3 axis lathe/mill hybrid design.
By GordonFreeman in forum Gantry/Router Machines & BuildingReplies: 1Last Post: 08-02-2017, 01:05 AM -
BUILD LOG: Hybrid Mill Design
By Chaz in forum DIY Router Build LogsReplies: 28Last Post: 03-12-2015, 11:31 PM -
Hybrid Stepper Servo
By Boyan Silyavski in forum Motor Drivers & ControllersReplies: 0Last Post: 08-06-2015, 12:41 PM -
Hybrid gantry
By routercnc in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 17-04-2012, 08:09 PM
Bookmarks