. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 25-04-2018 #23
    GrahamWhite's Avatar
    Lives in Boston, United Kingdom.
    GrahamWhite
    Last Activity: 16-03-2023 Has been a member for 9-10 years. Has a total post count of 51.
    I'm finally looking at the motors and drivers and found this place -omc-stepperonline.com
    in particular this driver
    https://www.omc-stepperonline.com/st...or-dm860t.html
    is that pretty much the same as the cnc4you one?
    https://www.cnc4you.co.uk/Stepper-Mo...r-60VAC-CWD872
    The stepperonline place don't do the 4Nm stepper though but they do have a 3Nm that pulls 4.2a as well as a 3Nm pulling 3.2a
    They have nema 24 @4Nm would they fit my pinion plates ?
    ---
    read more so the 24's will fit ,they have the same mount hole spacing within .1mm
    Agghhh - I know I need a Bob as well-one full of connectors or just a basic one, I have ordered a UC300eth for connecting to my pc so need 5v to power that- it that then an extra psu I need or can I pickup 5v from somewhere!
    Last edited by GrahamWhite; 25-04-2018 at 02:42 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEW MEMBER: New Build of a Joe's CNC Hybrid R&P 8x4
    By GrahamWhite in forum New Member Introductions
    Replies: 7
    Last Post: 20-03-2018, 07:16 PM
  2. BUILD LOG: Plans for new build
    By jas46 in forum DIY Router Build Logs
    Replies: 0
    Last Post: 21-09-2015, 02:17 PM
  3. MDF CNC Router plans / parts for home build beginners
    By HiltonSteve in forum Gantry/Router Machines & Building
    Replies: 81
    Last Post: 10-06-2012, 02:33 PM
  4. Trying to find a kit or plans to build.
    By don_jarr in forum Gantry/Router Machines & Building
    Replies: 2
    Last Post: 16-06-2011, 04:28 PM
  5. NEW MEMBER: Hi from rainy York - build plans/questions
    By bikepete in forum New Member Introductions
    Replies: 13
    Last Post: 11-10-2009, 07:43 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules