. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 10-04-2018 #22
    Desertboy's Avatar
    Lives in Leicester, United Kingdom.
    Desertboy
    Last Activity: 26-02-2025 Has been a member for 7-8 years. Has a total post count of 1,005. Received thanks 85 times, giving thanks to others 756 times.
    Quote Originally Posted by m_c View Post
    If that was really the case, then why are there no smaller AM drives?
    Leadshine's home market is probably far larger than Europe and America combined, so you would expect them to give priority to their home market, and be where they had the most diverse range.
    They just miniaturised the tech just like ps2 slim, Acorn Electron, C64s, etc. Same tech, smaller package, Maybe it is new tech but more likely a small revision on a new chip fab. They copy and pasted 80% the manual of the EM806 from the AM882 so if they couldn't justify paying for a new manual lol then how different can they really be.

    http://www.leadshine.com/productdeta...EM&model=EM806

    http://leadshine.com/productdetail.a...AM&model=AM882

    They're appears to be 1 difference in features, password protection of settings which is a non issue for me and a simple firmware change it's hardly ground breaking lol.

    They literally put it the manual/description into a (probably pirated lol) copy of word and did a copy and replace lol.
    Last edited by Desertboy; 10-04-2018 at 11:57 AM.
    http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm

    If you didn't buy it from China the company you bought it from did ;)
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. CSLAB CSMIO/IP-M 4-axis Ethernet Motion Controller
    By dudz in forum CS-Lab (CSMIO)
    Replies: 35
    Last Post: 02-01-2017, 01:27 AM
  2. BoB Suggestions within UK
    By andy_con in forum General Electronics
    Replies: 9
    Last Post: 09-05-2016, 10:39 PM
  3. USB/Ethernet controller for Mach3/4 advice
    By paulus.v in forum Control Hardware & Systems
    Replies: 17
    Last Post: 17-02-2015, 09:37 PM
  4. Boring Bar Suggestions?
    By Washout in forum Lathes, Lathe Rebuilding & Conversions
    Replies: 10
    Last Post: 21-06-2014, 08:59 AM
  5. USB and Ethernet Mach3 motion controller PLCM-E3
    By Purelogic R&D in forum Manufacturer News
    Replies: 39
    Last Post: 29-12-2012, 09:38 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules