. .
Page 2 of 2 FirstFirst 12

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    One of the benefits of using a TCT threading tool or a tap is that it already includes the flat or radius. I just used the app, chose my fit class, and it worked.

  2. #2
    Wal's Avatar
    Lives in Stockport, United Kingdom. Last Activity: 15-12-2024 Has been a member for 9-10 years. Has a total post count of 491. Received thanks 71 times, giving thanks to others 29 times.
    Hi all,

    I'm also hoping to have a go at this - I had a play around with writing the G-Code for it earlier in an effort to better understand what's going on, I've got something that might work - I wouldn't mind a bit of a sanity check on my process, though...

    For the sake of argument I'm going to be cutting an M4 thread. For the cutting tool I'm going to use an M4 tap ground down to a flat nose / single row of cutting teeth - I'll be using this tool for both the internal and external threads, but when cutting the external thread I'll adjust the radius to cut me a slightly deeper groove for a bit of clearance (...maybe I'm better off doing that on the internal thread..?)

    These threads don't need to be ISO compliant, so long as they work together that'll be fine!

    Here's the code I came up with for the external thread (probably ought to be a G17 in there..) along with a vid of Linux CNC running it:

    %
    G90 G21 G40 G49 M6 T1
    G0 X0 Y0 Z5
    G0 X-5
    G1 Z0 F500
    G1 X-3.571
    G2 X0 Y-3.571 Z-3.5 I3.571 J0 P5 F500
    G0 X-5
    G0 Z5
    G0 X0 Y0
    M2
    %

    (The radius of the arc is 3.571 as that'll bury a 4mm tap 0.429mm (male thread height) into the 4mm stock to be threaded.



    Does all of this look about right, or wishful thinking..? I guess I'll just have to give it a go..!

    Wal.

  3. #3
    My CAM uses a radius lead-in to the starting point
    You think that's too expensive? You're not a Model Engineer are you? :D

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Milling Plastazote LD33 closed cell Foam - Any milling advice?
    By Zeeflyboy in forum General Discussion
    Replies: 17
    Last Post: 06-04-2022, 10:12 PM
  2. Thread milling
    By Leadhead in forum Tool & Tooling Technology
    Replies: 1
    Last Post: 09-02-2018, 10:23 AM
  3. Square/Acme/Trapezoidal thread milling?
    By m_c in forum Tool & Tooling Technology
    Replies: 4
    Last Post: 22-04-2017, 12:07 PM
  4. inspiration thread
    By kingcreaky in forum General Discussion
    Replies: 47
    Last Post: 21-01-2016, 03:08 PM
  5. Thread milling shallow bind hole
    By suesi34e in forum Metalwork Discussion
    Replies: 28
    Last Post: 15-12-2015, 01:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •