I got a question about the power supply again... So it's been common feedback that amps don't matter since the circuit will only draw as much as it needs ( in the case of powering a uc300eth-5lpt it's a minimum of 0.5 amps as someone stated above) volts of course must be lower than the max voltage allowed(less than 5 volts in my case), but is there anything I should be watching for in terms of "watts?" I'm not too familiar with watts although I know it's a common measurement, but would watts be relevant??
Thanks in advance!

Sent from my Moto G (5) using Tapatalk