Thread: Control box rebuild
Threaded View
-
22-05-2018 #22
I'm on a buzz atm with lots of thoughts of this and that, think I found my second calling in building electronics (1st being woodwork) though I have a long way to go in learning.
My thought was in regards to the main cables from the drivers to the motors, although it was fun cutting and soldering the 4 pin plugs I was contemplating to have a single cable (per motor) running from the stepper to the motor with no 4 pin plug then if needed to separate I simply unplug the green connecter block on the driver.
Is this a done "practical" option or do people just stick with the plugs.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
REBUILD: Hardinge HC rebuild
By northumbrian in forum Lathe Rebuild LogsReplies: 29Last Post: 21-02-2017, 12:07 PM -
Centec 2A rebuild
By Web Goblin in forum Gantry/Router Machines & BuildingReplies: 3Last Post: 02-04-2013, 08:41 PM -
REBUILD: Blomqvist lathe rebuild
By Web Goblin in forum Lathe Rebuild LogsReplies: 9Last Post: 21-09-2012, 06:52 PM -
Stepper Driver Rebuild
By fidia in forum Motor Drivers & ControllersReplies: 0Last Post: 25-05-2011, 02:44 PM -
NEW MEMBER: New member wants to rebuild.
By black5f in forum New Member IntroductionsReplies: 2Last Post: 21-06-2010, 11:38 PM
Bookmarks