. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 17-05-2018 #8
    john swift's Avatar
    Lives in merseyside, United Kingdom.
    john swift
    Last Activity: 18-01-2021 Has been a member for 9-10 years. Has a total post count of 257. Received thanks 53 times, giving thanks to others 0 times.
    assuming you are using mach 3

    I expect in ports and pins you have

    X axis step = pin 2 , direction= pin 3

    Y axis step = pin 4, direction = pin 5

    Z axis step= pin 6 , direction= pin 7

    if that is correct

    change the Y axis to

    Y axis step= pin 8 , direction = pin 9
    then connect the " A axis " output terminals 8 & 9 to the Y axis stepper driver

    John
    Last edited by john swift; 17-05-2018 at 02:08 PM.
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to john swift For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. REBUILD: Hardinge HC rebuild
    By northumbrian in forum Lathe Rebuild Logs
    Replies: 29
    Last Post: 21-02-2017, 12:07 PM
  2. Centec 2A rebuild
    By Web Goblin in forum Gantry/Router Machines & Building
    Replies: 3
    Last Post: 02-04-2013, 08:41 PM
  3. REBUILD: Blomqvist lathe rebuild
    By Web Goblin in forum Lathe Rebuild Logs
    Replies: 9
    Last Post: 21-09-2012, 06:52 PM
  4. Stepper Driver Rebuild
    By fidia in forum Motor Drivers & Controllers
    Replies: 0
    Last Post: 25-05-2011, 02:44 PM
  5. NEW MEMBER: New member wants to rebuild.
    By black5f in forum New Member Introductions
    Replies: 2
    Last Post: 21-06-2010, 11:38 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules