3D Printed Plastic Clamps

[cropwell]

Just thought I would share these with you. I have printed a selection of T-nuts, blocks clamps and ramps, for light duty hold-down. Why (I don't hear you ask ) 'Cos I ran into a steel clamp with an expensive cutter and snapped it. At least these might allow the cutter to survive.

They all fit into my 8mm slot bed with M6 threads. No, I did not 3d print the threads, I cut them and the nylon screws were made in China.

The blocks were inspired by HobNob's 10x20x40 from ArcEuro http://www.arceurotrade.co.uk/Catalo...-Metric-Blocks , but they are only 2D and the yellow ones are 6mm thick.

Cheers,

Rob