machining Aluminium Tips?

[dfox1787]

Haha thank you. I've got a knock off go pro that I might mount to the machine.

Thank you for the feedback really helps. I've bought some cutting paste and a uncoated endmill to try.

Watched the video, lube would likely improve things a bit but if the finish is good, the size is good and tool life is good then it's good.
The camera man desisting from waving the camera about like a flag would improve things! ;-)

Sent from my SM-N910F using Tapatalk

[magicniner]

70% Paraffin to 20% 30 weight oil is ideal for aluminium, WD40 works well too.