Thread: G-code how to...
Hybrid View
-
25-05-2018 #1
I need help!
I have the g-code .The machine go from point A to point B following the path(the z axes no mater). I want my machine when he reach point B to go back to point A following the path and to repeat that for 6 time.
-
25-05-2018 #2
-
25-05-2018 #3
I undestand how the machine work.
Ok
Point A X0Y0
Point B X600Y600 to go back to A X0Y0 easy when are only 3 .points..code line easy
Point A X0Y0
Between the points are from start to end 43578 points complicate shape
Point B X600Y600 from hire to go back (from end to start) through all 43578 to Point A
Like ping-pong move. ...
-
25-05-2018 #4
Draw it in CAD and use CAM!
You think that's too expensive? You're not a Model Engineer are you? :D
-
26-05-2018 #5
Hey man,
Try this neat little on-line tool:
https://www.miniwebtool.com/reverse-lines/
Basically it reverses line order - just pay attention to what you're doing... (ie. canned cycles, G02 commands etc. will throw a spanner in the works - this method will only work point to point..!)
Wal.Last edited by Wal; 26-05-2018 at 03:05 PM.
-
26-05-2018 #6
Thank you Wal ! This is ...
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Plasma g code
By whensparksfly in forum Programmers CornerReplies: 0Last Post: 22-05-2016, 06:44 PM -
A little bit of G code help please!
By njhussey in forum Programmers CornerReplies: 19Last Post: 16-11-2015, 03:36 PM -
Anyone got some 2.5D G-code please ?
By dudz in forum Programmers CornerReplies: 5Last Post: 22-06-2013, 11:21 PM -
Cambium Code Web Tools – Parametric G-code Generation
By CambiumMachines in forum Manufacturer NewsReplies: 0Last Post: 09-01-2013, 04:56 AM -
G Code help
By moose007 in forum Programmers CornerReplies: 4Last Post: 22-05-2009, 11:39 AM
Bookmarks