Solar Sphere / Solar Magnet Engine

[wolfram-g]

Dear CNC friends,
rom my experiences of the last years, I have now built the final version of the SolarSphere.

SolarSphere 4.0
The advantages over the Model 3.0 are:
The drive (including lighting and loading module) as well as the substructure and the sphere are independent modules.
The sphere is made of polycarbonate and therefore insensitive to external influences.
The new rotor design eliminates the need for balancing.
The lighting is variable (the LEDs are plugged in and can be replaced by other coloured ones at any time).
Electricity consumption has been reduced by 80%.
The charging module (including USB connection) shows the operating status of the Lipo battery visually.
The magnetic bearing is stabilized and makes the rotor insensitive to vibrations.
These changes significantly reduce costs and production time.
SolarSphere 4.0: W=212mm D=148mm H=176mm

How it works is explained in the video down below.





Thanks for your interest

Wolfram

[magicniner]

YouTube SPAM then!
I stopped watching and disliked your video when you alluded to Perpetual Motion being "Something we can't achieve here", it's something no one can achieve anywhere in our reality because it's utter bollocks!

[AndyGuid]

Thanks Wolfram,

I like what you have shown here, and imagine you will market it as a kind of "Executive Toy"?

Andy

[wolfram-g]

Dear CNC Community,

After talking about this topic long enough,
I finished the project „SolarSphere“ with the following video.
Thank you very much for your interest and patience.
And now enjoy my very last video about the
ever-rotating „SolarSphere 4.0“



Sincerely
Wolfram Glatthar