Hi again.
Shortly after the the 3 weeks old conversation, I received 3 inductive switches, which I.ll install next week.
I like Rob.s approach of also keeping some mechanical switches in place next to the homing ones, but I.m somewhat unsure what.s the best way to wire all this.
I.ve only got 5 pins on the Bob, one being used for the probe. So 4 pins for the remaining Estop, 6 mechanical limit switches (2 for each axis), 3 inductive homing switches (3wires).

So for example (let.s say P15 is the probe)
1. Combine all limits and estop in let.s say P10 and have P11,12,13 for x,y,z home switches.
2. Combine all limits in P10 and all homes in P11, Estop in either P12 or 13
3. Combine the limits and home of each axis in one pin

So what the best wiring option and why?