Quote Originally Posted by john swift View Post

as your mother board is the E3363_P5GC-MX_1333

it only has SATA ports

so you can ignore my comment about only having
a master & a slave device connected to a 40 way ribbon cable
Although the photo does not make it clear, that Motherboard has an Ultra DMA IDE port and from the BIOS start-up screen, it looks as though Andrei has an 80way cable with a HDD and a CD-Rom connected, both plugged up on the jumpers as Masters. As I said CS (cable select) is a safer way to go. If XP has been installed on the SSD, then I would unplug the IDE HDD and see if it boots up. Although you may have to alter boot priority in the BIOS settings.