Quote Originally Posted by Radu_Andrei View Post
Quoting this guy with his reply to someone.s question:

So you would want the M6Start macro.
However My macro is meant for use with TTS holders Etc. and the Mach 3 tool table.
What your looking for is something just to move to a tool change position then touch off each tool. End quote ----this is what I need as well.
I do not have a tool changer, and the code Estlcam generates is M05 (stop spindle) M00 (stop machine) and then M03 (start spindle).

This means that I can move the spindle to a convenient position to change the tool, use my auto tool zero macro (I will PM you a copy if you like !) and then press <Cycle Start> to carry on, which will start the spindle and move to the next cut.

Cheers,

Rob