Help please. Dip switches and mach 3 settings

[cropwell]

Rob. I still don.t get why you seem so happy about the Kress router. I assume yoga might be your secret. :))

If I told you my secret, it wouldn't be a secret any more. There is nothing wrong with a Kress router, but it is noisier than a spindle and VFD. They are good quality, but my next build will have a water cooled spindle.

[cropwell]

Your carving lack of detail at the bottom edge, looks as though the wood was not set level to the XY plane. So I would check the bed is parallel to the X and Y axises.

[Radu_Andrei]

I just found out about the tramming thing and will do so in the next days. The bed was milled with a 10mm end mill, so I guess it should be somewhat parallel.