Threaded View
-
17-06-2018 #3
Last Activity: 24-07-2022
I wouldn't trust that website, as some of those settings are wrong. Virtually all cheap chinese spindles are 2 pole, and he says to set the VFD to 4 poles.I've re-setup the vfd with the settings as per this page:
http://www.halfbakedmaker.org/blog/post_idGerry
______________________________________________
UCCNC 2022 Screenset
Mach3 2010 Screenset
JointCAM - CAM for Woodworking Joints
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Huanyang VFD and spindle problem
By BriceO in forum Spindles & Drive MotorsReplies: 20Last Post: 07-08-2018, 08:56 AM -
Anyone controlling their Huanyang VFD with an analog control voltage?
By Ger21 in forum Generic Chinese SpindlesReplies: 9Last Post: 16-04-2017, 06:38 PM -
Weird problem - stepped/staged deceleration on Huanyang 2.2kw Spindle
By glynster in forum Spindles & Drive MotorsReplies: 0Last Post: 25-01-2016, 01:39 PM -
Huanyang hy02d223b frequence convertor problem
By frans cop in forum Motor Drivers & ControllersReplies: 3Last Post: 14-07-2015, 10:33 AM -
Drawing of water cooled spindle
By GTJim in forum Spindles & Drive MotorsReplies: 5Last Post: 11-02-2014, 04:21 PM
Bookmarks