4' x 4' x 8" Router Build

[JAZZCNC]

...and to the left of the welder, the ubiquitous DeWalt grinder :)

Yes, the good old Dewalt grinder and it's got the Evil wire brush on it.

All seriousness - that's a nice job - surprised that's the result of MIG, approaching TIG quality. Impressive.

If you think that's good you should see the welds that he does with the big German-made EWM Mig welder.!....That thing is amazing and the speed it welds at is unbelievable, the control panel is like a spaceship, you tap in a code for the material and type of weld joint you are doing and it sets all the settings amps. volts, wire feed, etc and monitors them as you weld, you basically pull the torch along and the metal just flows like water, he says it almost feels like cheating because it's so easy.

My reply is " So it bloody well should @ £6k"....