. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 26-06-2018 #5
    magicniner's Avatar
    Lives in Rotherham, United Kingdom.
    magicniner
    Last Activity: 05-05-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,021. Received thanks 230 times, giving thanks to others 42 times.
    Quote Originally Posted by SaporeCNC View Post
    magicniner I pass the code, it's something simple

    the example is done in Vectric Aspire, in this code the movement was smoother, with fewer stops ...

    it seems to me that everything is due to the "postprocessor" that each software uses to make the code G

    Can it be or am I going the wrong way?

    Thank you
    regards !!!

    N0G90
    N10
    N20M6T1
    N30M3 S18000
    N40G0 X8.764 Y18.331 Z6,000
    N50G1 Z-10,000 F762.0
    N60G3 X20.264 Y6.831 I20.264 J18.331 F2540.0
    N70G1 X100.264
    N80G3 X111.764 Y18.331 I100.264 J18.331
    N90G1 Y98.331
    N100G3 X100.264 Y109.831 I100.264 J98.331
    N110G1 X20.264
    N120G3 X8.764 Y98.331 I20.264 J98.331
    N130G1 Y18.331
    N140G0 Z6,000
    N150M30
    Really? Are you sure that ran?
    And the reason you didn't post the MasterCam code you were talking about would be.....?
    If behaviour differs with code from different CAM packages that strongly suggests your issue is code, not controller or it's settings, most of which are not on the General Config tab.
    Last edited by magicniner; 26-06-2018 at 08:42 AM.
    You think that's too expensive? You're not a Model Engineer are you? :D
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. HSM Advisor - High Speed Machining feed & speed calculator
    By magicniner in forum CAD & CAM Software
    Replies: 2
    Last Post: 20-01-2014, 12:57 PM
  2. Speed control
    By Saracen in forum Spindles & Drive Motors
    Replies: 2
    Last Post: 29-12-2012, 02:18 PM
  3. Adjusting speed with vfd
    By motoxy in forum Spindles & Drive Motors
    Replies: 8
    Last Post: 24-09-2012, 04:07 PM
  4. Top speed failing after a bit
    By Robin Hewitt in forum Machine Discussion
    Replies: 6
    Last Post: 12-11-2011, 12:46 PM
  5. Speed and Feeds
    By m.marino in forum Tool & Tooling Technology
    Replies: 0
    Last Post: 08-02-2011, 05:58 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules