Simple Lathe CAM

[m_c]

Fusion360?

Not the simplest, but it does have good turn functionality.

[Leadhead]

Yes I am using F360 and have access to other sophisticated programming, but by the time I have revised the methodology, again?
The guy at Ecam informs me there is no PP for Mach3/4 and limited tool shape input. But otherwise almost there. So still searching.

[Ross77]

Im using Fusion 360 and Linux, All free and works well, Lathe macros in Linux as well for quick one offs.

Fusion is a bit difficult to learm but as its CAD and CAM its quick to update the CAM after minor tweaks to the design.