Thread: VFD HY only rotates at 12000rpm
Threaded View
-
06-07-2018 #1
Hello everyone
Does anyone know how to configure the Chinese VFD HY on mach3?
I have it with the controller csmio ip-m
It is all connected and configured in mach but the mill only rotates at 12000 rpm and can not change it from mach MDI
these are the values entered in the VFD panel
Pd001 - 1
PD002 - 1
PD003 - 400 (default frequency)
PD004 - 400 (nominal frequency)
PD005 - 400 (high-end frequency)
PD008 - 220 (high-end voltage)
PD009 - 15 (middle end voltage)
PD010 - 8 (low voltage voltage)
PD011 - 200 (minimum frequency allowed)
PD014 - 4 (acceleration time)
PD015 - 6 (deceleration time)
PD046 - 9
PD052 - 2
PD070 - 0 (speed control input)
PD072 - 400 (high frequency)
PD141 - 220 (Nominal spindle voltage)
PD142 - 8.6 (Nominal spindle amperage)
PD143 - 2 (Number of poles)
PD144 - 3000
and the diagram shows how the mach3 is connected and configured
but it only rotates at 12000 rpm
thanks for your help
regardsLast edited by SaporeCNC; 06-07-2018 at 03:27 AM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
FOR SALE: Elte type spindle 0.55kW 12000rpm 220AC 3-phase
By Vladimir_MD in forum Items For SaleReplies: 3Last Post: 16-05-2010, 06:48 PM
Bookmarks