Hybrid View
-
12-07-2018 #1
-
12-07-2018 #2
There's a European supplier who will supply their machines already fitted with ballscrews (and I think steppers/servos), but I can't remember their name.
IIRC they were based in Austria, but it's been a few years since I looked at their website.Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
-
13-07-2018 #3
-
08-09-2018 #4
I'm buying an AMAT25LV from Amadeal when they come in stock.
Was going for the 30LV but can't fit it in yet and the extra rpm on the 25 will suit better. Will replace my X2.
Converting it with ballscrews and steppers 23/34 size to run off Mach3.
If all goes well I will move the Seig X2 conversion and use it primarily for drilling. Then in a year or so replace the X2 with the 25LV and buy a 30 to put in it's place. Might try to sell the X2 if I can bring myself to part with it.
Could do with a lathe really, I want to make new pulleys to bump up the rpm's on both AMAT's. Got a few plans and need a re-jig in the cave.
Keep me out of trouble for a couple of years I suppose :D
If I didn't mind gear noise I'd have got a Warco WM18 by now but being where I am I need as quiet as possible.Last edited by dazp1976; 08-09-2018 at 01:45 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NEW MEMBER: Milling machine conversion
By Pmw71 in forum New Member IntroductionsReplies: 7Last Post: 30-05-2020, 01:03 PM -
CONVERSION: Clarke milling machine CNC conversion CMD1225D
By Jonathan in forum Conversion Build LogsReplies: 10Last Post: 06-02-2019, 01:18 PM -
CONVERSION: Chester 626 milling machine conversion.
By RobWilson in forum Conversion Build LogsReplies: 6Last Post: 23-04-2018, 08:14 AM -
CNC Build - TEP milling machine conversion
By craynerd in forum Gantry/Router Machines & BuildingReplies: 6Last Post: 06-07-2015, 02:09 AM -
Axminster RF31 Milling Machine CNC conversion
By 1113562 in forum Milling Machines, Builds & ConversionsReplies: 0Last Post: 30-03-2010, 12:42 AM
Bookmarks