Selection of suitable milling machine for CNC conversion

[dazp1976]

I'm buying an AMAT25LV from Amadeal when they come in stock.
Was going for the 30LV but can't fit it in yet and the extra rpm on the 25 will suit better. Will replace my X2.
Converting it with ballscrews and steppers 23/34 size to run off Mach3.
If all goes well I will move the Seig X2 conversion and use it primarily for drilling. Then in a year or so replace the X2 with the 25LV and buy a 30 to put in it's place. Might try to sell the X2 if I can bring myself to part with it.
Could do with a lathe really, I want to make new pulleys to bump up the rpm's on both AMAT's. Got a few plans and need a re-jig in the cave.

Keep me out of trouble for a couple of years I suppose :D
If I didn't mind gear noise I'd have got a Warco WM18 by now but being where I am I need as quiet as possible.