Quote Originally Posted by Silver View Post
I am aware that we can't do away with the conversion process but that can be done on a board directly rather than having the UC100 plugged in can't it?

What o am saying is that even with the UC100 I will still have the same control system. It's only a thee axis and that alone hampers development.

I was planning to upgrade it eventually to 4 axis but with the issues of the converter it's possibly brought that forward as I still see that the UC100 is a "fix" and an adaptor rather than buying a replacement controller that doesn't need need the UC100.



Are you a CNC drive Sales man or ambassador at all? Seem to be pushing their products.!!
No I have no relation to the company other than I am a user. Have a UC300USB and a UC300ETH. That's all. Have used a Chinese USB motion controller before which was not a UC100 fake, it worked well unless I wanted to use the vacuum cleaner at the same time or wanted to use probing. I have no interest in selling CNC Drive products but I am also not recommending anything I don't have experience with.

You mentioned Mach3 and USB. I have no idea about any other solution which is financially and functionaly better. Nevertheless if you want to use W10 and the blue card is working then buying a UC100 is really a no brainer, you just replace the fake one with it.

If you want to use a stand alone controller then you don't need it.

But you do as you want. I really don't care. Just wanted to help.