Thread: Mach3 and USB to cnc driver
Hybrid View
-
24-07-2018 #1
Hi team.
I purchased a 2nd hand 300x400 cnc router that has the USB to parallel port conversion. See pic.
The previous owner was using madh3. Saw it running and have no issues parting with my Pennines..
So. I got it home, had a few health issues and then now finally after what seems like months I get it connected and downloaded the Mach3 software..
However connected the machine and my PC (windows 10/64) identifies it's there but I can't find the driver so I can connect.
It's identified in the device list as "CNC control via USB"
Would appreciate any help that you guys can direct me too..
Apologies if it's already been answered before but I have been searching the forum and can't find any info about it.
TIA.
Tried to upload a jpeg but says it's the wrong file extension. ,Last edited by Silver; 24-07-2018 at 09:55 PM.
-
24-07-2018 #2
When you say Mach3 and usb to cnc, do you mean you have a UC 100 ? This would replace the parallel port connection. If this is indeed the case, you will find what you need here :- http://cncdrive.com/UC100.html
If not the UC 100, then you would need to explain in more detail.
-
24-07-2018 #3
Thanks for the reply. @needleworks
I really don't know what it is, it doesn't have any writing if details on it.. it's a plug that fits in to the printer port on the board and has a USB port on the other end to allow me to plug a USB lead in to it.
I have a picture in Jpeg but it won't allow me to upload it for some reason.. picture paints a 1,000 words. So to speak..
Just clicked the link, it does look similar but it's all steel and has a micro USB plug on the input end..Last edited by Silver; 24-07-2018 at 10:32 PM.
-
24-07-2018 #4
-
24-07-2018 #5
Sorry mate, I can't help you with that one A quick google search has turned up this page though :- https://sites.google.com/site/usbres...all-usb-driver
Please don't take this as the correct driver for your controller, but it may help you a little. I'm sure one of the guys on here will be able to advise you better.
-
24-07-2018 #6
Thanks for the reply, I had seen that in my searches.
However it refers to putting my disk in to upload the driver.. the disk I don't have I'm afraid.. so was hoping someone on here has had a similar request..
The guy I brought it off is away on Holiday currently so can't get anything resolved there..
May have to wait until he is back to get it resolved.
Thanks again, but if anyone else has any advice greatfully received.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Looking for advice on converting driver on Boxford CNC Router to Mach3/4
By yankyg in forum Boxford RoutersReplies: 8Last Post: 20-02-2019, 11:40 AM -
XHC WHB03 mpg pendant Mach3 Driver
By Noplace in forum Artsoft Mach (3 & 4)Replies: 4Last Post: 07-12-2015, 06:43 PM -
FOR SALE: 3 Axis CNC USB Motion Card Mach3 200KHz Breakout Board For Stepper/Servo Driver
By dudz in forum Items For SaleReplies: 0Last Post: 03-01-2015, 03:40 PM -
Driver wiring to my computer for mach3 to control
By AdCNC in forum Motor Drivers & ControllersReplies: 13Last Post: 01-04-2010, 12:27 AM -
Mach3 / Laptop No line driver !
By bruce_miranda in forum Artsoft Mach (3 & 4)Replies: 1Last Post: 11-09-2008, 05:42 PM
Bookmarks