Thread: Seig C3 CNC spindle problem
Threaded View
-
13-08-2018 #1
Need help please, with my Seig CNC. This is an early conversion from Arc. Had problems for some time with the front guard micro switch. So took out the switch and coupled the wires together. Solved the problem and all was well until I accidentally dropped the wires and shorted the main fuse. I can now hear the relay clicking in and out as normal but no spindle movement. If you have any inclination towards a possible solution, I would be extremely grateful.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Huanyang VFD and spindle problem - VI/GND drawing voltage from my controller
By Mr*Beaver in forum Spindles & Drive MotorsReplies: 6Last Post: 20-12-2018, 03:40 PM -
Huanyang VFD and spindle problem
By BriceO in forum Spindles & Drive MotorsReplies: 20Last Post: 07-08-2018, 08:56 AM -
Problem with Spindle not spinning
By Noplace in forum Spindles & Drive MotorsReplies: 4Last Post: 22-01-2016, 02:40 PM -
seig x3 R8 V MT3
By dazza in forum Milling Machines, Builds & ConversionsReplies: 0Last Post: 18-02-2014, 01:14 PM -
CNC spindle control VFD problem
By djc in forum Motor Drivers & ControllersReplies: 1Last Post: 13-09-2009, 09:26 PM
Bookmarks