New here please help

[Clive S]

Hi, I'm using it on stabilized wood so I'm not wanting anything that will cut through thick steel. Thank you

You might get away with https://www.toolstation.com/shop/p59...RoCiIkQAvD_BwE

or https://www.wealdentool.com/acatalog...aight_239.html

Is the mill cnc'd

[Richardtweed]

Thanks I'll take a look at them. Would the spade end bits cut through resin? It's not a cnc unfortunately

[Clive S]

Thanks I'll take a look at them. Would the spade end bits cut through resin? It's not a cnc unfortunately

probably

[scooterist007]

Thanks I'll take a look at them. Would the spade end bits cut through resin? It's not a cnc unfortunately

The thing with spade bits, they have a point so still won't make a perfect flat hole.

Sent from my CLT-L09 using Tapatalk

[mekanik]

Hi Richard
You could try experimenting with the blacksmith drill recommended by greeny but grind it flat bottom, it needs to be fed slowly using a high rpm but this can only be done on a machine with fine feed control on the quill otherwise it could grab and pull itself into the job if you were to use the hand feed.
Regards
Mike