Creating G-code with estlcam

[johnsattuk]

I use Estlcam, I would just set my depth of cut to .1 mm in the tools list and depth of engraving at .3 mm

[Leadhead]

Beat me to that John. That`s just how I do it

[ravihotwok]

thats makes perfect sense, I just didnt know how to set that, for example when I was importing a dxf into planet cnc software, you could state a cutting deptch and then the depth each pass will make, so a cutting depth of 4mm but with 1mm passes if that makes sense.

Think I need to try and work out how to set tool information up

[Leadhead]

Here is Christians video of tool setup :-
https://www.youtube.com/watch?v=l48C...fnfQUA&index=2

[ravihotwok]

Leadhead thank you very much mate will have a look at lunch with a brew :-)